Make an apron from a couch (not a cow)

Tyson spends a lot of time in his shed and wanted a decent work apron.

After pricing both pre-made aprons and commercially available leather, it was looking like an expensive project. But then our neighbourhood had bulk waste and the problem was solved.

Given the number of leather couches we have seen on verges in the past six months, it seems there is at present a cultural trend to chuck them out. Perhaps the leather is irredeemably cracked or worn - but almost always only on the front. The back is often nearly two square metres of undamaged leather.

This provided all the leather Tyson needed to craft himself a beautiful apron, complete with clips salvaged from an old back pack.

Initial Time: Cutting leather from the couch down the road was a lot quicker than getting to a shop to purchase new material. Making a hand-crafted apron took many days.

Initial Cost: Two reels of heavy-duty thread and one pack of rivets (approx $15)

Ongoing time or cost commitment: Zero (and a LOT cheaper than buying new leather!)

Impact: Lets be honest - this action was motivated by convenience and finance, along with our commitment to recycle/ upcycle wherever possible. I won't bore you again with the figures about how much waste Australians make, but this took a big piece of leather out of landfill.

I have since done a little investigation into the environmental impacts of leather production and it seems this choice was also 'green' on several other counts. (As I am not ethically opposed to the killing of animals per se, this is not one of those counts for me, but it needs a mention as I know it is a deal-breaker for many others)

Firstly, tanning of leather involves toxic chemicals. I haven't found a solid source explaining what chemicals are used, but various (anti-leather) sites suggest formaldehyde, azocolorants, pentachlorophenol, lead, chromium, cyanide, arsenic, sodium sulfide, sodium hydroxide, sodium hydrosulfite and dimethyl amine (along with several other scary sounding compounds that when I looked them up turned out to not be toxic). Several of these are bioaccumulative heavy metals, building up in the bodies of tannery workers, the land on which tanneries are sited and the waterways that tanneries feed into. At the lower end of health concerns are skin and respiratory complaints (and that tanneries smell really bad); at the higher end are risks of blindness and up to 50% higher rates of cancer.

Then there re human rights concerns about the conditions that workers are under while producing leather - much of which reportedly comes from Bangladesh, where protections for workers are acknowledged to be poor. Many leather workers are children.

There are also concerns about excessive water use, especially when linked to also polluting waste water in ways that do not allow it to return safely to the ecosystem.

Cattle raising brings its own sustainability concerns (It should be noted that this relates particularly to more intensive forms of farming, which are less common in Australia's cattle industry, although animal rights groups believe the use of feedlots is on the increase here also). And although leather is a by-product of meat production, it is not a waste product. As meat consumption is in decline while leather consumption is increasing, it is likely at some point animals will be raised primarily for their skins rather than their meat.

There are also environmental concerns with faux leather, not least being its use of petrochemicals. Also, as it generally wears much quicker than leather, it becomes waste and needs replacing more regularly than leather products.

Both real and faux leather have the perpetual issues of energy use and pollution in production, transport, packaging and retail.

When I searched for 'recycled leather' I found either Pinterist craft ideas for reusing scraps, or options for commercially pulping scrap leather to roll into a new semi-leather product. All good, but meanwhile great big pieces of good leather are going into the bin with each bulk waste collection, as couch after couch is crushed and carried away. Get out there with your Stanley knives people and rescue some leather*!
(*from discarded couches that are clearly too worn out to be reused as couches)

Links:

A whole website dedicated to sustainable leather - talking chemicals, supply chains, waste, etc

Human Rights Watch report on tanneries in Bangladesh

Guardian article discussing environmental impact of leather vs faux leather

Shop Ethical Guide on issues in leather (although mostly quoting straight from PETA website)

RSPCA stance on leather

Someone else's blog considering these issues

Info for businesses wanting to recycle leather

Gumboot pots and Paper chains

Want to make your house pretty without consuming more, find creative activities for children that don't involve buying more, and/or re-use some of the stuff around your house that is no longer wanted? Here are two ideas that do all three.

Gumboots! There are so many cool kids' ones around but, no matter how funky, they still wear out or (if you're lucky) kids grow out of them. What to do with all that rubber-plastic prettiness?

A few spring flower punnets and an hour of working together and we have had these decorating our entrance for the last two months.

Although we did buy potting mix, more than half the soil was made up of our own compost. (We have three compost tumblers and our guinea pigs contribute substantially to this enterprise!)

Five of these six gumboots drained sufficiently without any help; the sixth needed a couple of holes added. Summer has nearly killed them off now and direct sun has faded the gumboots significantly, but we may get second season out of them and meanwhile, it has been a lot more fun than just binning them.

Your children might not rip through gumboots at quite the rate we do, but if you have anyone small in your house you are certain to have a pile of kids' artwork mounting up. And old posters. Calendars. Wrapping paper. (Most people I suppose have junk mail or magazines, but we don't receive them here)

Eva got inspired to make paper chains for Christmas and it was a great use for the build-up of paper.

Because they were using their own old artworks and posters they were willing to 'repurpose' things that I had not been allowed to throw away (sneaky, huh?!).

Note the hole-punching above. If you have someone who loves hole-punching, its not a bad way to add interest to strips from old calendars while keeping those hole-punching-hands from less productive outcomes.

They both loved making the chains and I am happy to have our living room decorated by their creativity and enthusiasm.

Initial Time: Both of these activities took about an hour. That was part of the point. We have no TV and its school holidays again. Creative, engaging, sustainable activities are what we need plenty of here. (I last wrote specifically about this when Eva was quite small but if you search the labels below for 'free kids activities' there are also other places it has come up as she has got bigger)

Initial Cost: Gumboot pots: about $30 for seedlings and a bag of potting mix; Paper chains: a couple of dollars for a big box of staples.

Ongoing time or cost commitment: We will eventually have to take both these things down and they will ultimately end up in the recycling (chains) or the general rubbish (boots).

Impact: It is impossible to really calculate an impact for these activities and, to be honest, it would probably be quite small anyway. But both are little bits of a bigger picture: finding ways to reuse everything until it really is beyond use, rather than chucking it out after its first purpose; avoiding buying stuff to meet a need (and considering whether it is in fact a need at all); helping children to be creative; celebrating colour and beauty and natural things; finding the quality in our own creative effort rather than needing a professional or 'perfect' outcome (often with associated waste) in order to be happy; sharing activities together and working collaboratively on a combined project.

Using construction waste

In our neighbourhood demolition of old homes and construction of new is a part of the streetscape.

Both our children can pick the sound of an excavator munching into a house from blocks away. Skip bins seem to decorate every street. 

 

We are neither demolishing nor building, but we try to do our small bit to put at least some construction waste to better use. 

One recent project was the guinea pig cage - aka The Piggie Palace. 

 

The Piggie Palace is made largely from old floorboards, salvaged (by a friend) from a house under demolition.

Timber from the bin in front of the construction site two doors up has partly been stockpiled, and partly used to construct shelves and bench in Tyson's teeny shed. 

Meanwhile I used bricks salavaged from the same site to make a new sandpit. 

 

After setting my team to work emptying out the patch of garden that had become known as 'the digging hole', I gave it brick walls. 

Tyson later added a black plastic lining to the bottom and new clean sand completed the transformation.

Initial Time: Collecting and storing waste materials took varying amounts of time, from about twenty minutes to collect and stack some bricks to a half day expedition to retrieve and store salvaged floorboards and other timber from the shed of a friend who was moving into a smaller place. Using salvaged materials added a little time to the Piggie Palace, as floorboards had to be ripped to the right width, but generally 'waste' takes no more time to use than new stuff.

Initial Cost: zero for waste materials; most projects have required some additional purchases (eg. sand for the sandpit, fastenings for the Piggie Palace)

  

Ongoing time or cost commitment: For these projects, zero. The ongoing commitment is to use materials we have salvaged and stored (mostly timber). Some of this timber (that which is not treated) will be burnt in our fire drum through the cooler months.

 

Impact: According to the Australian Bureau of Statistics, over 40% of the waste generated in Australia is construction and demolition waste. Most of it (over 80%) is concrete and bricks. Fortunately, there are efforts to recycle construction and demolition waste. In 2003 (the most recent statistics), 57% of this waste was recycled, compared with only 46% of total waste, meaning that 'only' 34% of landfill across the country was comprised of construction and demolition waste. Here in Perth, however, things are much worse, with only 21% of this form of waste recycled, making it 57% of our landfill (approximately 1.5 million of an annual 2.7 million tonnes of landfill). And even the national figures are not great when you consider that around 75% of this waste is 'clean excavated material, concrete, bricks and timber'. In New South Wales, this 75% is largely saved from landfill. The rest of us need to lift our game. (And perhaps we are. These are quite old figures. Something from 2012 apparently says WA has upped its recycling in this sector to 30-40%).

Bricks and concrete are supposedly easy and cost-effective to recycle, by grinding down for aggregate, which is used in things like low-grade roads and non-structural sub-bases. Timber is a little more difficult, as it requires manual labour to salvage good pieces, and for economic reasons most demolitions are heavily mechanised operations.

We did make sure to ask before skiving off home with a barrow of construction materials, as these could be a valuable resource, but in each case they were destined for landfill and no-one minded our salvage operations. The bits and pieces we have reused are a miniscule portion of what is being disposed of. But perhaps if more people started eying construction or demolition site skip bins as resources rather than waste gathering receptacles we could chip into the mountains of waste we are building up for our children.

 

Links: 

Four-minute video of construction waste recycling plant in Perth. You can also book a tour of the plant. (Thanks for the link M, for some reason your comment doesn't seem to be showing up)

House in Brighton UK made entirely out of waste materials. 

An episode of 'Josh's House' that particularly looks at construction and demolition waste, including a visit to a recycling plant for this material. (The program in general is all about Josh Byrne building two sustainable homes here in Perth in 2012-2013)

ABS article on waste in Australia, recycling trends, causes and impacts, and lots of statistics (of course, because its the ABS) 

Australian government publication with lots of information and case studies on recycling and reuse of construction and demolition waste 'across the supply chain'.

WA Waste Authority: oh so many information documents about construction and demolition waste.

Sustainabilty Victoria: 'How to minimise construction and demolition waste' with linked info articles

Environmental Protection Authority NSW: 'Disposing of household building waste' with documents for the beautifully named process of 'house deconstruction'.

Choose the UpCycle

What to do with all old top-loader washing machines that are no longer considered sufficiently efficient?

I've written before about upgrading to efficient washing machines but this creates a waste problem as obsolete washing machines relocate to landfill. Earlier in the year my sister bought a house that came with an old washing machine, which she replaced. Tyson has been re-using parts from that machine ever since, along with a second one he 'rescued' from the roadside on bulk rubbish.

Project one: fire drum.

This is the stainless steel drum from a top-loader washing machine removed from its casing. All those little holes keep the fire supplied with oxygen, and ensure warmth is at foot-level as well as face-level.

Tyson also rescued pieces of the electrics to use as the guts for a disc sander. That is, the spinny bits from the washing machine are now spinning a sanding disc. But it was a bit more complicated than that makes it sound - not really a straight swap.

 

He would like to add that if you are not at least a little familiar with electronics, this should not be attempted. In particular, the capacitor in an old washing machine (looks a bit like a D-cell battery) can retain enough charge to give you a nasty shock even long after the machine has been unplugged.

Some of the components of this sander, including the power switch, were amongst items salvaged from Tyson's Grampy's shed years ago, which are still being sorted through at his parents' house.

   

Smaller pieces from the washing machine were also used (along with much recycled timber) to build The Marble Run. Oh, the Marble Run... quite possibly the coolest thing in the world. Built in association with remodeling the children's bedroom without buying anything new. A photo just won't do, so here is a little video clip. See if you can spot pieces that might once have lived in a washing machine. Clue: look for metal.

 

The timber for the Marble Run was partly left over from building the loft bed (which was in turn largely made from furniture found on the verge at bulk waste time) and partly out of the skip bin for a construction site down the road.

The casing from the washing machine now stores wood for the fire drum

The power cord was reused for the sander. Tyson also salvaged a pile of screws and other bits and pieces for future use.

I believe trendy types call this 'upcycling'. But I am not trendy so to me its just using every possible piece that can be kept out of the bin. Yes, we do have a shed full of things that 'might be useful'. In fact, two weeks ago we acquired a second shed (Thank you gift-ers!)

Of course, not everything is re-usable, even with Tyson's handy-skills. The picture at the very top of this blog shows Tyson also pulling apart the old dryer that my sister removed from her house when she moved in (even new dryers are unbelievably wasteful and, in Perth, completely unnecessary, let alone really old ones). He discovered that the metal was inferior quality - flimsy sheet metal  - and most of the dryer ended up as rubbish, although a portion is in use as a shed shelf, and smaller bits and pieces were added to Tyson's stock of construction materials.

Initial Time: Pulling the first washing machine apart sufficiently to transport it home took Tyson a couple of hours. The second machine was quicker - he had learnt a few tricks by then. Building the sander took many hours snatched in bits over weeks and weeks, but (as with many of Tyson's projects) was also an activity often shared with Small Boy (and Bigger Girl, but it mostly happened when she was at school). The Marble Run keeps getting updates and alterations. The basic straight-run sections took only an hour or two, but if all the modifications were added together it has consumed a lot of hours. Ratio of fun-had-by-children to time-spent-building is still massively on the side of fun, though. So many hours of glee.

Initial Cost: zero for the fire drum; approx. $20 for a set of ten sanding discs and $25 for a velcro pad to attach them to the sander.

Ongoing time or cost commitment: sourcing firewood for the fire drum.

Impact: 

Anything we can do to reduce our waste is a good thing, as Australian households average around one tonne of household rubbish each year. When trying to explain recently to our Small Boy why we use cloth nappies and reusable nappy wipes, I slightly exaggerated by telling him every disposable nappy we threw away was being stored up to give back to him when he was a grown-up (which he pronounces 'donut'). But its only a slight exaggeration. The stuff we put in landfill will be around for our children and grandchildren to deal with into their adulthood. Would we think differently about our waste if we could see our one-tonne-per-year growing into a bigger and bigger pile, which would be ours personally to manage along with our pensions, long after we had all turned into donuts? I certainly would, and I am someone who already thinks about waste. Perhaps I have influenced my Small Boy - last time the truck came to pick up remaining bulk rubbish from the verge he wept and howled to see it all crunched away.

By re-using materials we also reduce our consumption - the opposite end of the cycle. At the consumption end the impact is around reducing the raw materials extracted from the earth to create the objects we desire, the fuel used to transport both components and completed items all over the globe, and superfluous material used in packaging all along the way. It is easy to forget both the origin and the end point for goods we consume - as if they begin life on supermarket shelves wholly created and vanish into thin air when the rubbish truck goes around the corner. 

Because of these concerns about consumption, we would never have bought ourselves a fire drum, as its not important enough to us in the scheme of things to warrant spinning the consumption wheel to acquire one (Tyson may have eventually purchased a sander, although he says probably not). A final impact, therefore, is that we are now very much enjoying items we would otherwise have foregone.

glass of wine not pictured

Redecorate with what you already have

When our Big Boy recently moved out of his cot into a full-size bed, I wanted to remodel the space left in the children's bedroom. I determined to do this without purchasing any new items.

Our children's book collection had outgrown its various shelves and baskets around the house. I wanted to bring all the books together and make a lovely space. I wanted a space that made the books look inviting, at child-height, well lit, and that encouraged reading by having an attractive, comfy reading spot. 

We shifted things around to relocate two shelves that had been in other use. One of these is from Tyson's childhood, repainted with left-over black spray paint when it was moved inside about a year ago. Additional shelves and shelf dividers use strong, plain-coloured cardboard boxes.

The carpet piece was from the off-cuts pile at a local carpet store. The installers bring all their excess back to the store and it is piled outside, free to all takers. (Truly. I asked inside)

The 'reading box' is a wooden blanket box that belonged to Tyson's grandmother, for which I made a padded cover. The padding comprises pieces of foam glued together - primarily the end of a couple of long mattresses that we trimmed to fit into the camper trailer, plus some pieces from an old kitchen chair. 

This was cased within a large banner advertising a kindy event earlier in the year. The cover fabric was all in my box of odds & ends of fabric. Some of this was purchased ages ago from the off-cuts box at our wonderful local fabric store (previously used as dress-up scarves, teddy bedclothes, toy animal paddocks, dolls house furnishings, etc), some remained from projects years ago, including fabric from my wedding dress, and other bits were 'scraps' from the sewing table of a friend who recently finished a costume design course.

  

The bunting was a gift to us from that same friend, using her scraps. She also renovated the quilt on the lower bunk for me - a heritage item given to me for my first 'big bed' when I was three.

Initial Time: In all its stages, this took bits of time over more than a week. Half a day of moving stuff. Half a day of sewing. Time picking up carpets while taking Eva to a birthday party. Bits and pieces.

My trusty helper. He presses 'reverse' for me.

Initial Cost: Zero. Oh, except a donation to the friend who did quilt fixing and about $4 for a tube of glue. I tend to overlook the occasional costs of restocking materials, like glue, paint or sewing thread, that get used for multiple projects. For this project, nothing needed replacing except the glue.

Ongoing time or cost commitment: Zero. And committing not to buy a throw cushion for the box (we have SO MANY throw cushions, but I have a weakness...)

Impact: The widespread appeal of shops that sell nothing but items to fit-out a home, especially decorative rather than functional fittings, is indicative of our culture's emphasis on purchasing more and more whenever changes are desired at home. A steady stream of advertising encourages us to desire changes. The abundant piles of household items on the verge at bulk rubbish collection, many in perfectly good condition, affirms the rate at which remodeling and replacing occurs. I love beautiful things, I enjoy creating lovely spaces and I am attracted to all the options for 'improving' our home. While I can't measure an exact impact of this action, resisting the urge to go and buy, and channeling it instead into finding ways to creatively re-use what we already had, feels like moving in the right direction for me.